Publish Time: 2023-03-30 Origin: Site
Although Smart Switches are now widely available, there are still many homes that do not yet use them. For those who have just used Smart Switches, many people do not know how to set up Smart Switches. Here I will tell you how to set up Smart Wifi Switch and how the principle of Smart Wifi Switch works. I hope that my compilation will be helpful to you.
Here is the content list:
l How to set up Smart Wifi Switch?
l How does the Smart Wifi Switch work?
Smart Wifi Switch is a breakthrough from the usual complex system image of a smart home, with one smartphone and a separate APP, you can control your home appliances remotely from anywhere in the world. The Smart Wifi Switch can be controlled locally or remotely and supports Android mainstream operating systems. The Smart Wifi Switch also supports real-time status feedback, which can be sent to the client in real time, and supports the setting of timed tasks. It is important to note that Smart Wifi Switch is based on a WiFi wireless communication module embedded in the device to achieve the communication effect between the product and the mobile phone, please make sure you have entered the correct WiFi password, you can click the small eye icon behind the password bar to display the password. Before starting the configuration, please make sure you have pressed the main switch for 3 seconds to make the signal light start flashing (0.5 seconds). Please place the main unit closer to the router for configuration. If the Smartlink does not work, please try to use AP mode for configuration. If it still does not work, please power the mom off and on again and try again.
The Smart Wifi Switch is simply a serial WIFI module added to our home wall socket to convert serial data to wireless data. In the mobile phone, we also configure a simple app operating platform (either developed by the hardware company itself or directly using a third-party smart platform), in which we configure the corresponding switch socket and application scenario according to the operating instructions, thus enabling direct control of the switch via the mobile phone. For Zigbee and Bluetooth switches, the communication protocol module changes, and the principle are mostly the same.
In addition to the protocol modules mentioned above, the Smart Wifi Switch also contains at least the following modules: Firstly, the power processing section, which converts the AC power into the DC power required by each signal or control module. Secondly, the signal control section, which is similar to the CPU of a computer, in the Smart Wifi Switch is the programmed chip that receives and processes the various input signals to form the output. Thirdly, the input signal section, i.e. the various input signals, possibly WiFi signals, touch signals, key signals, etc. Fourthly, the output signal section, which is used to control the operation of the appliance, is usually made up of relays or SCRs. In our traditional domestic wall switches, the input signal and the output signal are the two main components, while the input is mainly a push-button switch and the output is mainly a relay.
Well, now you know a little bit about how to use a smart switch. But it is important to know that Smart Switches are very versatile and there are many more functions for you to discover. The above is all I have compiled on how to use the Smart Wifi Switch. If you want to know more, you can go to our website to check it out, our official website is http://www.jsankou.com/.