What are the main parameters and features of the Touch Switch?

Touch Switch is a human infrared intelligent induction switch when the infrared induction detection area through the touch to start the switch. Touch Switch has a unique algorithm, effective to avoid key mis-activation linkage, can be directly taken from the machine voltage stabilization power supply, touch key induction series with automatic correction and compensation function, in the production process of production technology requirements, are high. The capacitance determines the sensitivity and is not affected by the ambient temperature in the production process, making it suitable for mass production. Here are some answers.

Here is the content list:

What are the main parameters of Touch Switches?

What are the features of the Touch Switch?

What are the main parameters of Touch Switches?

Firstly, withstand voltage is the maximum voltage that a Touch Switch can withstand between the conductor and ground. Secondly, the insulation resistance is the resistance between the conductor and the insulated part of the Touch Switch, which should be at least 100 MΩ. Third, contact resistance refers to the Touch Switch in the open state, the resistance value between each pair of contacts is generally required in 0.1-0.5Ω or less, the smaller the value the better. Fourth, the rated voltage is the Touch Switch in the normal operation of the permitted safety voltage, the voltage added to the two ends of the Touch Switch is greater than this value, which will cause the two contracts between the fire breakdown. Fifth, the rated current is the maximum safe current allowed to pass through the Touch Switch when it is switched on. When this value is exceeded, the Touch Switch's contacts will burn out due to excessive current.

What are the features of the Touch Switch?

Firstly, the Touch Switch is a product of new technology. It generally refers to a wall switch designed by the touch sensor chip principle and is an alternative to traditional mechanical push-button wall switches. Secondly, Touch Switch allows for smarter, more convenient operation. Touch Switch has unparalleled advantages over traditional switches and is used very frequently in current household products. Thirdly, the Touch Switch is an intelligently controlled wall switch that consumes a certain amount of power. In standby mode, due to the single-flame intelligent switch, the backup power is supplied by the current flowing through the electronic ballast and the intelligent wall switch control circuit. Fourthly, if the standby input current is very small, it will render the standby circuit inoperative. If the standby input current is high, the electronic ballast lamp will go out and problems such as red flashing lights will occur when the cold flashing incandescent lamps are switched off. Fifth, when working, because the single fire intelligent switch works through the pressure difference between the two ends of the switch to take power, if the switch is closed, no pressure difference can take power, this will lead to the problem of losing power when the control circuit is turned on.

Committed to bringing more and better products to our customers, this is what we have always done. If you are interested in our Touch Switch products or have other needs, you can contact us at http://www.jsankou.com/, we welcome your visit and look forward to working with you. Our company adheres to the corporate culture of "quality-oriented, customer first", and always strives to become a professional Touch Switch supplier in the industry.