Views: 31 Author: Site Editor Publish Time: 2023-06-02 Origin: Site
On the market, there are two more types of matching Smart Zigbee Switch: wired and wireless, whose performance is analogous to that of a wireless laptop and a networked desktop computer. Wired gateways are better than wireless ones in terms of transmission rate and network stability. Smart devices connected via WiFi are particularly dependent on the wireless network, and unless the wireless network is particularly stable and reliable, you will often encounter situations where the device goes offline or loses its connection. If you have a gathering of friends and family, and you have a lot of connected phones, you will get stuck. In addition, if the telecoms broadband fails or the router loses power, the smart devices in your home will become useless, and ZigBee will be a good choice. Let's take a look at the differences and connectivity of the Smart Zigbee Switch.
Here is the content list:
The Smart Zigbee Switch is similar to the Smart Wifi Switch, but there are significant differences.
Tutorial on how to connect the Smart Zigbee Switch to the network.
The Smart Zigbee Switch is similar to the Smart Wifi Switch, but there are significant differences. We know that the Smart Wifi Switch allows you to control the switch remotely from your phone as long as you have internet access at home, or if you don't have WiFi routing at home, then you can also network directly through your mobile hotspot and control the switch from your phone. The Smart Zigbee Switch can be isolated from your home broadband network, so even if your router fails or your home is disconnected, the Smart Zigbee Switch will still work. The Smart Zigbee Switch works even when your router is down or your home is disconnected. In addition, the Smart Zigbee Switch is very power efficient, with much less standby power than a WIFI switch socket, and the Smart Zigbee Switch can even run on batteries. Most importantly, in contrast to traditional switches, Smart Zigbee Switch uses relays and smart modules instead of the original mechanical switches, with the switching of lights, shifted to relays for control. Of course, the relay opens and closes the circuit no differently from a mechanical switch, but the main difference between the Smart Zigbee Switch and a conventional switch is that both the opening and closing of the relay and the working of the smart module require electricity, and the switch itself becomes an electrical appliance. However, as already mentioned, there is no zero wire in a conventional switch junction box, and a single firewire is not enough to form a complete circuit that allows the Smart Zigbee Switch to work.
Firstly, add the Smart Zigbee Switch, if you have already added it this step can be ignored. Download and install the corresponding APP in Huawei Market or App Store, open and log in, then click the "+" button in the top right corner to add devices, select "Gateway Central Control" and find "Wireless Gateway (ZigBee)" in the right area according to the gateway type. Wireless gateway (ZigBee)", "Wired gateway (ZigBee)" and other types, click and enter the WiFi configuration interface. The phone should ensure that it is connected to the 2.4G wireless WiFi network of the corresponding room. Secondly, after successful addition, you can view the device on the corresponding APP "My Home" page, click on the name of the new ZigBee gateway to enter the device page. In the top right corner of this page, you can set the properties and change the device name. Click on "Add Sub Device" at the bottom of the page, or click on the "+" button at the top right corner of the "My Home" page to add a device, select "Electrician "Click on "Switch (ZigBee)" (depending on the type of switch.) Third, long press the switch key for about 7-10 seconds, and the switch indicator light will flash, then check the "Confirm indicator light is flashing" at the bottom of the app interface, click "Next" and wait for the app to finish adding the device. Fourth, after successfully finding the device, it will enter the "Add Success" interface, where you can click on the device name to rename it, and then click Finish. You can check or control the status of the device in the app after the network is completed.
If you are interested in Smart Zigbee Switch, you can contact us at http://www.jsankou.com/. We welcome your visit and look forward to working with you. The company has always pursued the tenet of dedicated service, quality and innovation, and reputation first. Continuously absorbing advanced technology and providing quality after-sales service, your satisfaction is our promise. Warmly welcome domestic and foreign users to visit and guide us, and cooperate sincerely.
