Views: 0 Author: Site Editor Publish Time: 2023-03-01 Origin: Site
Diy Wall Switch & Socket, as the name suggests, is a wall-mounted switch and socket that connects electrical appliances to switches and sockets. The Diy Wall Switch & Socket is wired to the wall and can connect electrical appliances to switches and sockets.
Here is the content list:
l How to wire Diy Wall Switch & Socket?
l The installation position of the Diy Wall Switch & Socket.
Diy Wall Switch & Socket wiring needs to be carried out according to the drawings. First, look for the exact location of the Diy Wall Switch & Socket on the drawings, position the socket first, and then draw a rough frame on the wall. Next, measure the distance of the vertical wire and pipe alignment and the distance next to it, all of which need to be measured accurately. In addition, the same width must be measured in the corners of the wall, and according to the points just measured, two vertical lines can be drawn with a bullet line. Then cut, we can start the construction of the pipe slot with the help of an electric drill, the depth of the slot should match the diameter of the pipe so that it can be in the right place, and it must be opened neatly, which is very much able to highlight the professional level of a construction team. Next, we open up a hole in the wall box and inlay a joint from inside and outside the box. Once the joint is made, we set it inside the open wall, ensuring that the bend is smooth and the pipe does not break, and then connect the pipe to the box. Then make sure you have the Diy Wall Switch & Socket wire and the other wires divided into zero fire and earth, if there is no earth there should be another power protector. Finally find that there is a zero wire, earth wire, and firewire, we will Diy Wall Switch & Socket wire above the zero wire into the zero wire, fire wire into the firewire, earth wire into the earth wire on it, if there is no earth wire then you can not connect.
Before installation, you should have a rough estimate of the size and position of the furniture in the room so that the Diy Wall Switch & Socket can be installed in a reasonable position to make the best use of it. Otherwise, if the furniture is not in the way after installation, the normal use of the furniture will be affected and inconvenienced. Of course, it is also important to avoid areas that can be touched by children to avoid unnecessary hazards.
The Diy Wall Switch & Socket wiring and the installation position of the Diy Wall Switch & Socket are explained here, Diy Wall Switch & Socket wiring seems to be a relatively simple job, but must not be sloppy if the wrong connection after the consequences are hard to imagine, so in the installation of some the Diy Wall Switch & Socket wiring may seem like a relatively simple task, but it must be done carelessly. If you are interested in our products or have any other requirements, please feel free to contact us. Our official website is http://www.jsankou.com/.
